 Origin |
China |
| Brand Name |
Fischer & Porter |
DIM plug-in electromagnetic flow meter is used to measure conductive liquid which is particularly applicable to large-diameter pipeline measurement, and is widely used in petroleum, chemical, metallurgical, power, paper, food, water treatment and other industries.
| Model |
DIM Series |
| caliber |
DN350 - DN2000 |
| Accuracy |
± 1.5% of measured values (standard) ± 1.0% of measured values
(special) ± 0.5% of measured values (high precision)
|
| The minimum conductivity : |
5μs/cm |
| Measuring range |
Recommend use of: 0.5m / s ~ 10m / s continuous adjustable
The greatest use of: 0.2 m / s ~ 15m / s continuous adjustable |
| Medium temperature |
-20oC ~ +150oC |
| Environmental temperature |
-20oC ~ +60oC |
| Fluid pressure |
≤ 1.6MPa |
| Grading Protection |
Sensor Converters
IP67 IP67
IP68 IP67 |
| Material |
probe materials: 304 stainless steel, electrode materials : 316 stainless steel, insulation layer : PTFE |
| Electrical Interface |
M20x1.5, 1/2'' NPT |
| shows |
Standard dual LCD can also showed that the instantaneous and cumulative flow |
| Power |
220VAC 50HZ 24VDC |
| Explosion-proof grade |
Exd[ia]iam ll CT5 |
| Signal output |
1, volume can be set to switch: pulse output (maximum 1000 HZ);
High / low flow alarm;
ATC alarm;
Signal flow direction;
Fault Alarm;
2, current output :4-20 mA output |
| Configuration mode |
1, through three key scene manual configuration.
2, the scene through remote configuration.
3, a parade through hands-site configuration.
Memory: The EEPROM memory will not disappear without batteries preservation |
|
Click to enlarge image
Related Keywords:
Bookmark / Share this page